How’s this for a feature necklace!

I’ve been fixing a few jewellery items lately, you may have noticed 🙂 It makes a bit of a change, and I like to see what is special to other people. I also enjoy looking at the techniques that have been used, and quite often I shake my head at the shortcuts that I see. Mind you, the breakages I am fixing are generally caused by children pulling on things, not necessarily poor workmanship!

Today’s necklace is a gorgeous, bright, multi-strand eye-catcher!

coloured necklace 1

It was originally strung on thread, and I was not surprised when the owner told me it broke quite early on, given the weight of the necklace. It was restrung by a family member of the owner, and she quite rightly used wire. She did a pretty good job, however it has again broken. Due to regular use of crimps around the back of the necklace, it looks like not many beads were lost when it broke – I worked on the idea that just 4 small beads were missing, and the length of those beads was easily made up with the clasp I attached.

I took several photos so I could have records of how it went together, in case I had to totally dismantle it before I could put it back together.

Coloured necklace 2

I could see that the 3 strands didn’t hang separately, they were braided twice.

The three strands of wire didn’t continue throughout the necklace. You can see they finished between the red and yellow beads above the aqua bead cap. There was a crimp hidden inside the bead cap, and then several more around the back to the other bead cap. There was no clasp, instead the two wire ends were crossed over and held in place with crimps.

This is certainly a technique that can be used when you don’t want to use a clasp, or there is no need for one. This necklace is long enough to slip over your head, so a clasp is not necessary. However, since it is quite heavy, I think adding the clasp allowed me to make the join stronger.

I have two widths of Tigertail (wire) I work with – 0.38mm and 0.45mm. Mostly it doesn’t matter which one I use, but in some cases I need the thinner one because I am working with tiny beads, and sometimes I need the wider one as I am making a heavier piece.

This time I needed to use the 0.45mm Tigertail due to the weight of the necklace, but was hoping it would fit through the tiny yellow beads three times!

Even though the yellow beads are very small, this time I was able to restring reasonably quickly by threading the new wire through the old strand then sliding the beads across.

Coloured necklace restringing technique. somethingspecialbyfiona.wordpress.com

In this picture the new wire is on the left, the old wire on the right. I have moved some beads over to the left, and then continued with this process. Working on a small section at a time, this is still a much faster way to rethread rather than putting each bead on individually. (Mind you, it still took around an hour to compete this job.) Luckily the hole through the beads was big enough to let me do this. You may remember when I hope to use this technique before when fixing another necklace, but couldn’t 😦

Once I had finished the three strand part, I braided them loosely twice then gathered all three wires together and crimped them. I hid that crimp under the aqua bead cap, as had been done previously. If you can manage to hide or camouflage a crimp then please do so 😉

The next big yellow bead slipped on easily as it had quite a large hole, so I managed to hide another crimp inside. Then I fitted on the rest of the beads, very pleased that the three strands of wire fitted through those little yellow beads.

Normally when finishing off you would thread the wire back though a couple of beads before cutting it off. This just makes things a bit neater, hiding the cut wire between two beads instead of at the clasp.

So I added two large crimps, then the clasp, and threaded the three wires back down through the crimps. Of course there was no way I would fit six wires back through those beads. The next problem is that no matter how good your cutters are, you can’t cut the wire cleanly off right next to a bead or crimp. You just can’t get in that close. It’s not generally a problem when you have threaded back through a couple of end beads, because the wire end can slip back into a bead. So I squashed the crimp closest to the clasp to hold everything in place, then I very carefully slid the second crimp down a touch to cover the cut ends before squashing it. I am talking a millimetre at most here. Hopefully that is enough to stop the wires scratching the wearer’s neck, because that doesn’t feel nice at all.

Coloured necklace fixed! somethingspecialbyfiona.wordpress.com

I didn’t think to take a close-up of the clasp end, sorry.

So hopefully with the three strands running the whole way through the necklace it will be stronger. And I’ve managed to hide most of the crimps to give a slightly cleaner look.

And how about those colours? They would jazz up just about any outfit! What do you think?

* Linking up with Mimi’s A Tray of Bliss

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s